We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Skytee 2 Alt Azimuth Mount: Setup, Balancing and Tips for Beginners

Learn how to set up and balance a Skytee 2 alt azimuth mount, aim at targets, and avoid common beginner mistakes for better views of the night sky.

Updated November 2026

The skytee 2 alt azimuth mount is a manual, two-axis mount that moves a telescope up and down (altitude) and side to side (azimuth). Once you set it up level, balance the tube, and learn how to track an object by hand, you can center planets, the Moon and bright deep-sky targets with far less fuss than with a basic tripod. This guide walks through the steps in order and points out the mistakes that cause most early frustration.

If you are still deciding whether this design suits you, What Is Alt Azimuth Mount? How It Works for Beginners (2026) explains the basic movement before you set anything up.

Shopping for one? See our guide: Celestron Alt Azimuth Mount Review: Features and Performance.

Before You Set Up the Skytee 2 Alt Azimuth Mount

Gather everything first so you are not hunting for a missing bolt in the dark. Work out where the mount will sit, and check that the ground is firm, because any wobble will show up as blurry views at high magnification.

  • The mount head, tripod and any hardware that came in the box
  • Your optical tube with its rings or dovetail, plus the eyepiece you plan to use first
  • A small bubble level or a phone level app for checking the head
  • A red-filtered flashlight so your eyes keep their night vision

Step-by-Step Setup and Leveling

  1. Extend and lock the tripod legs to a height where you can reach the eyepiece without bending far. Tighten every leg lock evenly.
  2. Attach the mount head to the tripod and snug the center bolt. Do not overtighten, since stripped threads are hard to fix outdoors.
  3. Level the head. Place your level on the mount’s flat surface and adjust the tripod legs until the bubble centers in both directions. Leveling matters more on an alt azimuth mount than on most tripods, because the altitude axis has to move freely in a true vertical plane.
  4. Mount the optical tube and tighten the rings or clamp so the tube cannot slide.
  5. Balance the tube. Loosen the altitude lock and let go. If the tube swings up or down on its own, slide it in the rings or move the counterweight until it stays put at several angles.

Aligning Roughly Toward North

An alt azimuth mount does not track the sky automatically, so precise polar alignment is not needed for casual viewing. Point the tube roughly north using a compass or a known star, and you will be close enough to find most objects. For longer sessions where you want smoother tracking, the approach described in Alt Azimuth Mount Head: How It Works and How to Set It Up Right is worth reading.

Finding and Tracking Objects by Hand

Start with a bright, easy target. The Moon works well because it is large and obvious. Use the finderscope or red-dot finder to center it, then check the image in the eyepiece. Once the object is centered, nudge the mount slowly in altitude and azimuth to keep it there. Because the Earth rotates, objects drift across the field fairly quickly at high power, so expect to make small corrections every minute or so.

For a broader overview of how this mount style handles different targets, Alt Azimuth Telescope Mount: How It Works and Who Should Use One is a useful companion.

Common Mistakes to Avoid

  • Skipping the leveling step, which causes the tube to drift and makes the view feel unstable.
  • Leaving the balance uncorrected, so the tube tips when you release the lock.
  • Using a high-power eyepiece on an unsteady tripod. Let the setup settle for a minute after bumping it.
  • Pointing the finder at the wrong object because the telescope was not aligned with the finder first.
  • Forgetting that dew can build up on the optics on humid nights. Keep a cloth or dew shield handy.

A few accessories make this mount easier to use at the eyepiece.

  • A compact bubble level helps you level the head quickly every time you set up, so you do not have to guess. View on Amazon
  • A red-dot finder is easier to use than a plain optical finder, especially for beginners. View on Amazon
  • A red flashlight preserves dark adaptation while you read star charts and adjust the balance. View on Amazon

FAQ

Do I need to polar align the Skytee 2 alt azimuth mount?

No. Alt azimuth mounts do not require precise polar alignment for visual observing. A rough northward orientation and a level head are enough for most casual sessions.

Why does my telescope drift out of view?

Earth’s rotation carries the sky across the field, and this is more noticeable at high magnification. Make small manual adjustments to re-center the object, and check that the mount is level and the tube is balanced.

Can I use this mount for astrophotography?

Manual tracking is hard to sustain for long exposures, so this mount is better suited to visual observing. For photography, many people look at a dedicated setup covered in Alt Azimuth Mount Astrophotography: A Step-by-Step Guide for Beginners.

Conclusion

Level the head, balance the tube, and rough-align it toward north, and the skytee 2 alt azimuth mount will give you steady, usable views. Practice finding a few bright targets before tackling faint deep-sky objects. Each session gets easier as your hands learn the movements.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Astronomy Site.