We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Alt Azimuth Mount Astrophotography: A Step-by-Step Guide for Beginners

Learn how to use an alt azimuth mount for astrophotography, including setup, field rotation limits, exposure tips and common mistakes to avoid on your first nig

Updated November 2026

An alt azimuth mount astrophotography setup lets you photograph the night sky with a camera on a simple two-axis mount that moves up-down and left-right. You will learn how to level and align the mount, how to keep short exposures sharp despite the lack of polar alignment, and how to recognize the limits of this approach. With the right expectations, you can capture the Moon, bright planets and wide star fields with good results.

Understand What an Alt Azimuth Mount Can and Cannot Do

An alt azimuth mount rotates around a vertical axis (azimuth) and a horizontal axis (altitude). Stars drift in a circle around the celestial pole, so tracking them requires both axes to move in a coordinated way. Without a polar alignment, a fixed camera will show star trails within seconds to a minute at normal focal lengths. For a quick primer on the design, see What Is Alt Azimuth Mount? How It Works for Beginners (2026).

Shopping for one? See our guide: Celestron Alt Azimuth Mount Review: Features and Performance.

Because of this, most people use an alt azimuth mount for short exposures, lunar and planetary work, or wide-field shots with a motorized GoTo or tracking drive. It is a practical choice for beginners who want to start imaging quickly.

Set Up the Mount for Imaging

  1. Set the mount on a stable, level surface. Use the built-in bubble level or a spirit level on the base.
  2. Balance the camera and lens on the mount. Loosen the clamps, slide the load until it sits centered, then tighten. An unbalanced load strains the motors and causes drift.
  3. Point the mount north (or south, depending on your hemisphere) as a rough orientation. This helps the GoTo system or tracking drive run in the right direction.
  4. Perform a two-star or three-star alignment if your mount supports GoTo. Use bright stars well separated across the sky.
  5. Check focus on a bright star at high magnification using live view. Lock the focus once it is sharp.

Choose Exposure Times and Manage Field Rotation

Without accurate polar alignment, stars move across the frame and also rotate slowly around the image center. This is called field rotation, and it grows with exposure length and distance from the pole. Keep individual exposures short. A common approach is to shoot many short frames and stack them later, so any drift or rotation in a single frame has limited impact.

Shorter focal lengths tolerate longer exposures. A wide-angle lens on an alt azimuth mount can handle a few seconds per frame, while a telephoto lens may require much shorter exposures or active tracking. Test a few frames and inspect the stars at 100% zoom before committing to a long session.

Common Mistakes

  • Skipping the level check, which causes skewed tracking and uneven star trails.
  • Overloading the mount beyond its rated payload. Heavy lenses reduce accuracy.
  • Using long single exposures instead of stacking many shorter frames.
  • Forgetting to recheck focus after temperature changes overnight.
  • Aiming near the zenith with a mount that has a blind spot there, which can cause GoTo errors.

A stable tripod keeps vibration down during shutter release, which matters more than most beginners expect. View on Amazon

A remote shutter release or intervalometer lets you take frames without touching the camera, avoiding shake. View on Amazon

A small spirit level for the mount base makes leveling faster and more consistent from session to session. View on Amazon

FAQ

Can I do deep-sky astrophotography on an alt azimuth mount?

You can capture bright deep-sky objects and wide star fields with short exposures and stacking. Long exposures of faint targets generally need a properly polar-aligned equatorial mount or a dedicated tracking system.

Do I need polar alignment for alt azimuth imaging?

Polar alignment is not required for short exposures, but without it star trails and field rotation appear faster. Accurate leveling and GoTo alignment help reduce these effects.

How long should my exposures be?

It depends on focal length and how well the mount is leveled and balanced. Test a few frames and check the stars at high zoom, then keep exposures short enough that stars stay round.

Conclusion

An alt azimuth mount can deliver satisfying astrophotos when you keep exposures short, level the mount carefully and stack many frames. Start with the Moon, planets or wide star fields to build your technique. As your skills grow, you can decide whether a tracking upgrade or equatorial mount suits your goals better.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Astronomy Site.