Skywatcher 2x De-Luxe Achromatic Barlow Lens: How to Use It for Sharper Views
Learn how the Skywatcher 2x De-Luxe Achromatic Barlow Lens doubles your eyepiece magnification, where to place it, and what it shows you on planets and the Moon
Updated November 2026
The Skywatcher 2x De-Luxe Achromatic Barlow Lens doubles the magnification of any eyepiece you already own. Set it up correctly and you can take a 25mm eyepiece to the equivalent of 12.5mm, which is often enough to split close double stars, sharpen lunar craters and show more surface detail on Jupiter and Mars. This guide covers how to fit it, where it goes in the optical train, and the mistakes that most often cost beginners clarity.
What the Barlow Lens Does to Your View
A Barlow is a negative lens that sits between the telescope and the eyepiece. It lengthens the effective focal length of the telescope, so every eyepiece you pair with it gives twice the magnification it would alone. A 10mm eyepiece in a telescope with a 1000mm focal length normally yields 100x; with a 2x Barlow it yields 200x. Because the image is larger, the field of view shrinks by the same factor, so a Barlow makes it harder to find objects. Use it for targets that are already small and bright, not for wide-field sweeps.
Shopping for one? See our guide: Top 5 2x or 3x Barlow Lens for Planetary Viewing Compared.
Setting Up the Skywatcher 2x Barlow
Most Skywatcher 2x De-Luxe Achromatic Barlow Lens owners use it in one of two ways: threaded directly into a 1.25-inch diagonal, or with the eyepiece inserted into the Barlow’s own barrel. Check the thread size and barrel diameter on your own unit before buying adapters, since mismatched fittings are the most common setup problem.
- Start with your lowest-power eyepiece and center a bright target, such as the Moon or Jupiter, in the field.
- Remove the eyepiece and insert the Barlow into the diagonal or focuser, leaving the eyepiece out for now.
- Reinsert the eyepiece into the Barlow and rack the focuser slowly until the image snaps into focus.
- Refocus gently after each change, because the Barlow moves the focal plane further out and may need more focuser travel than you expect.
Where the Barlow Goes: Before or After the Diagonal
With a diagonal, the Barlow usually works best placed between the diagonal and the eyepiece. Placing it in front of the diagonal, between the telescope and the diagonal, is also possible but can be awkward if the Barlow’s barrel length pushes the eyepiece too far out. Check focus range before committing to a permanent setup, especially with heavier eyepieces that may sag. For a fuller explanation of the trade-offs, see Where to Put a Barlow Lens: Before or After the Diagonal (2026).
What You Will See and Where It Helps Most
A 2x achromatic Barlow is most useful on bright, high-contrast targets. The Moon is the classic example: crater rims and rilles become sharper at higher power, and the terminator reveals more relief. Jupiter’s cloud belts and the Galilean moons show better detail, and Mars benefits during opposition. Deep-sky objects such as globular clusters and tight double stars also gain from the extra power, although faint nebulae usually look dimmer and less rewarding when magnified further. For a broader comparison of what the lens shows at different powers, read What Is a 2x Barlow Lens? How It Works and What It Does and When to Use a Barlow Lens: Get More Power Without Losing Sharpness.
Checklist Before Your First Session
- Confirm the Barlow’s thread size and barrel diameter match your diagonal or focuser.
- Use a steady mount and let the telescope reach thermal equilibrium before judging sharpness.
- Start with a bright target so you can judge focus and clarity.
- Keep a lower-power eyepiece on hand for finding objects.
Common Mistakes
- Expecting a wide view. The Barlow doubles magnification and halves the field of view, so finding targets gets harder.
- Pushing magnification past what the sky and optics allow. Atmospheric turbulence often limits useful power well before the Barlow does.
- Forcing threads. Cross-threading can damage the Barlow or the diagonal; back the fitting out and realign if it resists.
- Ignoring focus. Refocus after every change, since the Barlow shifts the focal point.
Recommended gear
- A 1.25-inch diagonal, because it provides a standard thread for most Barlow designs. View on Amazon
- A set of quality eyepieces in a range of focal lengths, so the Barlow has useful lengths to multiply. View on Amazon
- A planetary observing filter kit for reducing glare when viewing the Moon and bright planets. View on Amazon
FAQ
Does the Skywatcher 2x Barlow fit every telescope?
It fits telescopes that accept standard 1.25-inch eyepieces, provided the fitting matches your diagonal or focuser. Check the barrel size and thread before buying an adapter.
Will a 2x Barlow make my view too dim?
Yes, somewhat. Magnification spreads the same light over a larger image, so the view gets dimmer, though bright targets like the Moon and planets usually remain easy to see.
Can I use a Barlow with a camera?
You can, though results depend on the camera and adapter. Many astrophotographers prefer a dedicated Barlow designed for imaging, so check compatibility with your setup.
Conclusion
The Skywatcher 2x De-Luxe Achromatic Barlow Lens is a simple way to double your eyepiece magnification and sharpen views of the Moon, planets and tight double stars. Set it up with the right fittings, refocus after each change, and match the power to the seeing conditions on the night. Start with bright targets and you will quickly learn where the extra magnification pays off.
Related reading
Ready to choose one?
