We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Gso 2x Achromatic Barlow Lens: How It Works and How to Use It (2026)

Learn what the gso 2x achromatic barlow lens does, how to set it up in your telescope, and what to expect for sharper planetary and deep-sky views.

Updated November 2026

The gso 2x achromatic barlow lens doubles the magnification of any eyepiece you use with it, so a 10mm eyepiece behaves like a 5mm. It is a simple way to get more detail on the Moon and planets without buying another eyepiece. This guide explains how it works, how to set it up, and where its limits are.

What the gso 2x achromatic barlow lens actually does

A Barlow is a negative lens placed in the light path ahead of the eyepiece. It spreads the converging light from the telescope’s focuser, which increases the effective focal length and therefore the magnification. A 2x Barlow roughly doubles the focal length of whatever eyepiece sits behind it, while the field of view shrinks by about half.

Shopping for one? See our guide: 6 Best Gso 2 2x Ed Barlow Lens Compared for Planetary and Deep-Sky Viewing.

The “achromatic” label means the lens is built from two cemented elements designed to bring two wavelengths of light to the same focus. That reduces the purple or green color fringing you might see around bright objects. It will not eliminate color error entirely, but it generally produces a cleaner image than a single-element Barlow of similar power. For background on the concept, see What Is a 2x Barlow Lens? How It Works and What It Does.

How to set it up in your telescope

Placement matters more than most beginners expect. Insert the Barlow into the focuser or diagonal, then seat the eyepiece in the Barlow’s barrel. The usual rule is to keep the Barlow close to the eyepiece end of the light path rather than deep in the focuser, because that gives a more predictable focus range.

  1. Start with the lowest-power eyepiece you own, such as a 25mm or 20mm, so you can find focus easily.
  2. Thread or slide the Barlow into the 1.25-inch or 2-inch diagonal, depending on your gear.
  3. Insert the eyepiece into the Barlow and check that all locking screws are snug but not overtightened.
  4. Point at a bright, high-contrast target like the Moon, aim the telescope, and rack the focuser slowly through focus.
  5. If you cannot reach focus, the Barlow may be too close to the diagonal or the eyepiece is too far out. Adjust the spacing and try again.

For a fuller walkthrough, see How to Use a 2x Barlow Lens: A Step-by-Step Guide for Beginners and Where Do You Place a Barlow Lens: Step-by-Step Guide (2026).

Choosing eyepieces and targets that suit a 2x Barlow

Doubling magnification only helps when your telescope’s optics and the sky conditions can support it. A common rule of thumb is to keep total magnification under about 50x per inch of aperture, though steady air often limits you well before that. Planetary targets like Jupiter, Saturn, and Mars respond well to added power. Wide deep-sky fields such as open clusters look better at lower power.

Target Typical result with a 2x Barlow
Moon (crater detail) Usually improves when seeing is steady
Saturn and Jupiter Often benefits, especially for cloud bands and ring detail
Double stars Helpful for tighter separations
Wide open clusters Usually better without the Barlow

Owners often report that pairing the Barlow with a good-quality mid-range eyepiece gives a more usable field than using a very short-focal-length eyepiece alone. For a broader comparison of 2x and 3x options, see Difference Between 2x and 3x Barlow Lens: Which Should You Choose?.

Checking your view and avoiding image degradation

After focusing, let the telescope cool and the air settle. Thermal currents in the tube can soften the image at high power. If stars look like shimmering blobs, try a lower power before blaming the lens. Also make sure the Barlow’s threads or barrel are clean, since dust on the glass reduces contrast noticeably.

If you cannot see through the setup at all, the cause is usually spacing or a mismatch in focuser travel rather than a faulty lens. Why Can't I See Through My Barlow Lens? 6 Causes and Fixes covers the most common problems.

Common mistakes

  • Doubling power and expecting a brighter image. Magnification spreads the same light over a larger area, so the view gets dimmer.
  • Using the Barlow with a very short eyepiece on a small telescope, which pushes past what the optics can resolve.
  • Overtightening locking screens, which can strain the barrel or scratch the eyepiece.
  • Judging the lens on a turbulent night. Wait for steadier air before deciding whether the extra power helps.
  • A quality mid-range eyepiece pairs well with the Barlow, giving a usable field at the doubled focal length. View on Amazon
  • A dew shield or lens cap helps keep the optics clean and reduces moisture on cold nights. View on Amazon
  • A collimation tool helps you confirm the telescope’s optics are aligned, which matters more as magnification rises. View on Amazon

FAQ

Does the gso 2x achromatic barlow lens work with all telescopes?

It works with most refractors and reflectors that have a standard focuser, but check that the barrel size matches your diagonal or focuser. Some telescopes need an adapter for 1.25-inch versus 2-inch fittings.

Will it make my view dimmer?

Yes, somewhat. Doubling magnification spreads the same light over four times the area, so the image gets dimmer, though sharp optics help keep it usable.

Can I use it for astrophotography?

It can be used with cameras in some setups, since it increases the effective focal length. Results depend on your camera and mount, so test it on a bright target first.

Conclusion

The gso 2x achromatic barlow lens is a simple, versatile accessory that effectively doubles your eyepiece collection. Used with steady skies and a sensible eyepiece choice, it can reveal more detail on planets and the Moon. Start with a low-power eyepiece, experiment with spacing, and judge the results on a night with good seeing.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Astronomy Site.