We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Where to Put a Barlow Lens: Before or After the Diagonal (2026)

Learn where to put a barlow lens in your telescope train, whether before or after the diagonal, and how placement changes focus, image quality and magnification

Updated November 2026

A Barlow lens goes between the telescope and the eyepiece, and in most setups it belongs in the focuser drawtube, just ahead of the eyepiece. If you use a diagonal, the usual answer is to place the Barlow between the diagonal and the eyepiece, though some observers put it ahead of the diagonal for a different result. Where to put a barlow lens depends on your focuser, your diagonal and whether you want to reach focus easily.

Understand the Light Path First

Light travels from the primary mirror or objective, through the focuser, into the diagonal (if one is used), and finally into the eyepiece. The Barlow is a negative lens that stretches the light path, so its position changes both the magnification you get and how far the eyepiece must move to reach focus. A Barlow placed farther from the eyepiece gives a larger magnification change in some setups, which is why placement matters more than most beginners expect.

Shopping for one? See our guide: 5 Best Barlow Lens for Telescope Picks Compared (2026).

Where to Put a Barlow Lens With a Diagonal

The most common placement is after the diagonal and directly before the eyepiece. This keeps the Barlow in the converging beam, where it works as intended, and it lets you use the diagonal for comfortable viewing on high-angle targets. Most owners of standard refractors and reflectors use this arrangement.

Placing the Barlow before the diagonal, inside the focuser with the diagonal behind it, is also possible. Some observers prefer this for a slightly shorter total train and better focus reach with long eyepieces. The image quality is generally similar, but the magnification factor may shift a little, so check the result on a bright star or the Moon before settling in. For a deeper comparison, see Barlow Lens Before or After Diagonal: Where to Place It (2026).

Placement Without a Diagonal

Without a diagonal, put the Barlow directly in the focuser, then insert the eyepiece into the Barlow. This is the simplest arrangement and the one most often recommended for straight-through viewing. It works well for bright, close targets like planets and the Moon, where the eyepiece position does not need to be comfortable at high angles.

Step-by-Step Setup Checklist

  1. Confirm the Barlow’s barrel size matches your focuser, usually 1.25 inch or 2 inch.
  2. Decide whether you need a diagonal; use one for overhead targets.
  3. Insert the Barlow into the focuser, or between the diagonal and eyepiece if you use one.
  4. Screw or slide the eyepiece into the Barlow’s receiving end.
  5. Rack focus gently on a bright star or the Moon, and fine-tune until the image snaps sharp.
  6. Test the result on a planet and adjust placement if focus is out of reach.
Setup Barlow position Best use
Straight-through In focuser, eyepiece after Barlow Planets, Moon, double stars
With diagonal (standard) Between diagonal and eyepiece General viewing, high-angle targets
With diagonal (alternate) In focuser, diagonal after Barlow Focus reach with long eyepieces

Common Mistakes

  • Placing the Barlow too far from the eyepiece, which can push focus out of reach.
  • Forgetting that a Barlow changes magnification, so the eyepiece you pick matters.
  • Ignoring the focuser’s inward travel; check that you can reach focus before buying.
  • Overlooking dust on lens surfaces, which softens images once the Barlow is in the path.
  • Assuming every placement gives identical results; test each arrangement on a bright target.
  • A Celestron X-Cel LX Barlow is a common choice for owners who want a well-regarded, widely available lens for planetary work. View on Amazon
  • A Orion Barlow lens suits observers who want a straightforward accessory for their existing focuser. View on Amazon
  • A Celestron X2 Barlow is often mentioned for compact setups where focus reach is tight. View on Amazon

For a broader look at what the accessory actually does, read What Is a Barlow Lens Used For? Magnification Explained Simply and How Does a Barlow Lens Work? Magnification, Focus and Tips.

FAQ

Should a Barlow go before or after a diagonal?

Most observers place it after the diagonal, directly before the eyepiece. Placing it before the diagonal is a valid alternative that can improve focus reach with some eyepieces.

Does Barlow placement change image quality?

Image quality is usually similar in both positions, but magnification and focus travel can differ. Always check the view on a bright target after changing placement.

Can I use a Barlow with a 2 inch focuser?

Yes, if the Barlow matches the 2 inch barrel size. Confirm barrel compatibility before purchasing.

Conclusion

For most telescopes, the Barlow belongs just before the eyepiece, either in the focuser or between the diagonal and eyepiece. Test both positions on a planet or the Moon to see which gives comfortable focus and the sharpest image. Once you find the right arrangement, note it so setup is quick on future nights.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Astronomy Site.