Refractor Type Telescope Star 36050: What It Is and How It Shows You the Sky
Learn what a refractor type telescope star 36050 shows you, how to set it up, and which eyepieces and checks help you get sharp views of planets and stars.
Updated November 2026
A refractor type telescope star 36050 uses a lens at the front of the tube to gather and focus light, giving you sharp, high-contrast views of the Moon, planets and bright star clusters. This guide explains what that optical design means in practice, how to set the instrument up for your first observing session, and what to check so the view stays crisp. You won’t need to know any optics formulas to get good results.
Understand what a refractor type telescope star 36050 actually does
A refractor collects light through a large objective lens and bends it to a focus at the eyepiece end of the tube. Because there is no central obstruction, the image has strong contrast, which helps when you look at the Moon’s craters, Jupiter’s cloud bands or the edges of globular clusters. Refractors also tend to hold their collimation without much fuss, since the optics are sealed in a single tube.
Shopping for one? See our guide: Top 6 APO Refractor Telescopes for Astrophotography Compared (2026).
What the telescope will not do is show you faint, distant galaxies in great detail. Aperture, the diameter of the objective, sets how much light you collect, so a small refractor shows fewer deep-sky objects than a larger reflector. Set your expectations around bright targets first.
Set up the mount and tube correctly
- Place the tripod on firm, level ground away from wind and direct streetlights.
- Attach the mount head and tighten all knobs by hand until snug, not overtight.
- Mount the optical tube and balance it so it stays put when you let go of it.
- Insert a low-power eyepiece in the focuser and tighten the thumbscrew.
- Let the tube cool outdoors for 20 to 30 minutes so air currents settle inside.
Focus and find your first target
Start with the Moon, which is bright and easy to locate. Point the tube at it using the finderscope, then look through the eyepiece and turn the focus knob slowly until the edge of the Moon is sharp. Overshoot slightly, then bring the focus back in the other direction so you hit the sharpest point, not the nearest one.
Once the Moon is sharp, try Jupiter or Venus. Planets are small, so use a medium-power eyepiece and wait for steady moments of air, which often come in short bursts. If the image shimmers constantly, the atmosphere is the problem, not the telescope. A related read: Reflector or Refractor Telescope for Beginner: Which Should You Choose?.
Choose eyepieces and check the image
Magnification equals the focal length of the telescope divided by the focal length of the eyepiece. Start with a moderate eyepiece, then add higher or lower power only if the image stays bright and steady. Very high magnification on a small refractor usually looks dim and soft. Keep the eyepiece clean and dust-free, and check that the focuser draws smoothly before each session.
Quick checklist for each session
- Tripod level and locked down
- Tube balanced on both axes
- Finderscope aligned with a distant landmark during daylight
- Eyepieces clean, lens caps off only when observing
- Telescope cooled for 20 to 30 minutes before peak viewing
Common mistakes
- Using the highest-power eyepiece first, which makes everything dim and blurry.
- Pointing the telescope at the Sun without a proper solar filter, which can cause permanent eye damage.
- Overtightening the mount knobs, which can strain the threads and shift alignment.
- Judging sharpness before the tube has cooled to outside temperature.
- Expecting faint galaxies to look like photographs.
Recommended gear
A basic set of eyepieces in two or three focal lengths lets you match magnification to the target. View on Amazon
A stable tripod with a fluid-damped head makes it easier to track planets without constant readjustment. View on Amazon
A solar filter sized to your objective is essential if you ever plan to observe the Sun safely. View on Amazon
FAQ
Can a refractor type telescope star 36050 show planetary moons?
Jupiter’s four largest moons are usually visible as small points of light, and Saturn’s rings are often visible at moderate power. Fine surface detail on the moons will not show clearly.
Do I need a motor drive to observe with this telescope?
A motor drive is helpful for higher magnifications because objects drift out of view quickly. For casual lunar and planetary observing at low to moderate power, you can nudge the mount by hand.
How do I know if the focus is set correctly?
The image should look sharpest with the focuser in a stable position, and stars should look like small points rather than fuzzy discs. Small adjustments in both directions help you find the best point.
Conclusion
A refractor type telescope star 36050 rewards careful setup more than complicated technique. Start with the Moon and bright planets, learn to focus slowly, and match your eyepiece to the target. With a few sessions of practice, you will see the sky with clear, high-contrast views.
Related reading
- iTek Refractor Telescope Review: Specs, Strengths and Who It Suits
- Wide Field Refractor Telescope Picks Compared for 2026
- Vivitar Refractor Telescope 60x/120x Review (2026): Pros, Cons & Verdict
- Vivitar 60x 120x Refractor Telescope with Tripod Review (2026)
Ready to choose one?
