We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

National Geographic 70mm Goto Refractor Telescope: A Practical Guide (2026)

Set up a National Geographic 70mm GoTo refractor telescope step by step, from alignment to first targets, with tips to avoid common beginner mistakes.

Updated November 2026

A National Geographic 70mm GoTo refractor telescope is a small, computer-guided scope that can find and track objects for you once it is aligned. This guide walks you through the setup, the alignment routine, and your first night of observing, so you spend less time fumbling and more time looking at the Moon, Jupiter, and bright star clusters. Exact menus and button labels vary by model, so check your manual for the specifics.

Before You Start: Check Your Parts and Your Site

Lay out everything before the sky gets dark. Confirm the tripod legs are locked, the mount head is secure, and the optical tube is attached to the mount with its dovetail or clamp tight. A loose tube is the most common source of blurry images and failed alignments.

Shopping for one? See our guide: 3 Best National Geographic 70/350 Automatic Refractor Telescope Picks Compared.

Pick a site with a clear view of the sky, ideally away from streetlights. Place the tripod on firm, level ground. Level the tripod by eye and make sure the mount’s polar axis is roughly pointed at the sky, since many GoTo mounts use an alt-azimuth design that does not need polar alignment.

Step-by-Step Setup and Alignment

  1. Install the batteries or connect the power supply. Most GoTo mounts need a steady supply, and weak batteries cause slow or erratic slewing.
  2. Insert the eyepiece with the lowest magnification (the longest focal length) and focus on a daytime object, such as a distant tree or building, to get a rough focus before dark.
  3. Power on the hand controller and select the alignment mode. Enter your date, time, and location when prompted, or use the GPS function if your model includes one.
  4. Point the telescope at the first alignment star the controller suggests. Center it in the eyepiece using the slow-motion or directional buttons.
  5. Confirm the alignment. Repeat with the second star. Choose stars that are well separated across the sky, not clustered in one corner.
  6. Once aligned, select an object from the database and let the mount slew to it. Center the object and confirm to refine the position.

Choosing Your First Targets

A 70mm aperture gathers modest light, so start with objects that are bright enough to show detail without much effort. The Moon is the easiest target and shows craters and the terminator, the line between light and shadow, very clearly. Jupiter with its four largest moons is a strong second choice, and bright open clusters such as the Pleiades offer a wide, pleasing view.

Keep your expectations realistic. Faint galaxies and nebulae will appear as soft gray patches rather than the colorful images in published photographs. Dark skies and patience help more than any accessory.

Tips for Better Results on Your First Night

Let the telescope reach outdoor temperature for about 20 to 30 minutes before observing. Warm optics form less shimmer. If the mount slews to the wrong place, re-align with stars farther apart rather than repeating the same pair.

Common Mistakes to Avoid

  • Skipping the daytime focus check, which leaves you searching for focus in the dark.
  • Using stars that are too close together for alignment, which causes pointing errors later.
  • Entering the wrong time zone or date, which throws off every slew.
  • Starting with high-power eyepieces, which magnify both the image and any wobble.
  • Touching the tube during observing, which transmits vibration into the image.

A red-light headlamp helps you read the controller and star charts without ruining your dark adaptation. Look for one on Amazon: View on Amazon.

A planisphere or a free star chart app helps you identify alignment stars before you go out. Search for one here: View on Amazon.

A lightweight carrying case protects the optics and keeps the mount organized between sessions. See options here: View on Amazon.

FAQ

Do I need to polar align a GoTo refractor?

Most alt-azimuth GoTo models do not require precise polar alignment, because the alignment routine handles pointing. Check your manual to confirm your specific mount type.

What is the best first object to find?

The Moon is the simplest target and gives a clear test of focus, tracking, and alignment. Jupiter is a good next step once you are comfortable.

Why does my GoTo mount miss the target?

The most common causes are poor alignment star choices, incorrect date, time, or location settings, and weak power. Re-align using stars spread across the sky and confirm your settings.

Conclusion

With a careful setup, a solid alignment, and well-chosen first targets, a National Geographic 70mm GoTo refractor telescope can deliver rewarding views of the Moon and bright deep-sky objects. Take your time on the first night and the routine becomes quick and easy. Consult your product manual for model-specific steps and safety notes.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Claire Whitaker
Claire Whitaker

Claire Whitaker writes reviews and buying guides for Astronomy Site.