We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Bresser Achromatic Refractor Telescope 700 70mm: Setup and Observing Guide

Learn what the bresser achromatic refractor telescope 700 70mm shows, how to set it up, and which eyepieces and tips get the best views of Moon, planets and sta

Updated November 2026

The bresser achromatic refractor telescope 700 70mm is a small, portable scope with a 70mm objective and a 700mm focal length. With the right setup, it gives you sharp views of the Moon, bright planets, star clusters and the brighter deep-sky objects. This guide covers what to expect, how to assemble and align it, and how to get the most from its eyepieces.

What the 70mm Aperture Actually Shows You

Aperture sets how much light the scope collects, and it limits how fine a detail you can resolve. A 70mm objective gathers far more light than the naked eye, so you will see many more stars and clearer features on the Moon than binoculars offer. Planets show as small disks, and Jupiter’s four large moons and Saturn’s rings are visible when the air is steady. Faint galaxies and nebulae will look like smudges rather than the detailed images seen in photographs.

Shopping for one? See our guide: Skywatcher 70mm Refractor Telescope: 4 Best Picks Compared (2026).

The 700mm focal length means the tube is long relative to its aperture. Paired with a 25mm eyepiece, you get roughly 28x magnification, a comfortable starting point. Shorter focal-length eyepieces raise the power but dim the image, so expect the best results in the 20x to 50x range.

Step-by-Step Setup

  1. Set the tripod on firm, level ground and extend the legs to a height that keeps your eye comfortable at the eyepiece.
  2. Attach the mount head and tighten the locking knobs. Loose fittings cause vibration that blurs the image.
  3. Mount the optical tube and secure it with the mounting bracket. Check that it balances and moves smoothly.
  4. Insert the lowest-power eyepiece into the diagonal or focuser, then tighten the set screw.
  5. Point the scope at a distant daytime object, focus until it is sharp, and center it in the finder.
  6. Align the finder scope with the main tube so the target appears centered in both.

Allow the optics to reach outdoor temperature before observing. A tube that is still cooling produces shimmering images, a common complaint among new owners.

Eyepieces, Focusing and Target Selection

Start with the eyepiece supplied, then add a higher-power option only when the view is steady. Use a 10mm or 6mm eyepiece for the Moon and planets, and a wider eyepiece for star fields and clusters. Racking the focuser slowly from one side to the other locates the sharpest point; tiny adjustments make a large difference at high power.

Good first targets include the Moon, Jupiter and Saturn, the Pleiades, the Orion Nebula and the Double Cluster in Perseus. Use a planetarium app or star chart to find them, and observe from a dark site when you can.

Quick Reference

Eyepiece focal length Approximate magnification Best use
25mm About 28x Wide views, star clusters, first setup
10mm About 70x Moon, Jupiter, Saturn
6mm About 117x Detailed planetary views when air is steady

Common Mistakes

  • Using the highest magnification first. Steady, moderate power almost always looks better than maximum power.
  • Observing over hot pavement or a warm roof. Rising heat causes blurring that no focuser adjustment fixes.
  • Skipping the finder alignment, which makes locating targets frustrating.
  • Expecting photographic color or detail on faint deep-sky objects.
  • Forgetting to let the tube cool, which leads to soft, shimmering views.

A red-light flashlight preserves your night vision while you handle the scope. View on Amazon

A planisphere or star chart helps you identify targets before you go outside. View on Amazon

Extra eyepieces at different focal lengths let you adjust magnification without changing the whole setup. View on Amazon

FAQ

Can the bresser achromatic refractor telescope 700 70mm show planetary rings?

Yes. Saturn’s rings are visible as a distinct shape on steady nights, and Jupiter’s cloud bands are faintly visible. Detail depends on air conditions and your eyesight.

Do I need a special eyepiece to start observing?

No. The supplied eyepiece is enough for the Moon and bright star clusters. Add a second eyepiece later once you know which magnification you prefer.

Is this telescope suitable for astrophotography?

It can record the Moon and planets with a smartphone adapter or a basic camera, but deep-sky imaging needs a sturdier mount and longer exposures than this setup typically offers.

Conclusion

With careful setup and moderate magnification, the bresser achromatic refractor telescope 700 70mm delivers rewarding views of the Moon, planets and bright clusters. Start with low power, observe on steady nights, and build your eyepiece collection gradually. Check the official manufacturer documentation for current specifications and accessory compatibility.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Claire Whitaker
Claire Whitaker

Claire Whitaker writes reviews and buying guides for Astronomy Site.