We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Gskyer 70mm Astronomical Refractor Telescope: Setup and First-Light Guide

Learn how to set up and use a gskyer 70mm astronomical refractor telescope, from assembly and eyepiece choice to finding your first planets and Moon targets.

Updated November 2026

A gskyer 70mm astronomical refractor telescope is a small, portable instrument that shows the Moon’s craters, Jupiter’s cloud bands with its four largest moons, and bright star clusters with real clarity. This guide walks you through assembly, eyepiece selection, alignment and your first night of observing, so you can get useful views on the first clear evening.

Assemble and Align the Telescope

Start by mounting the optical tube on the altazimuth mount and tightening the locking knobs just enough to hold the tube steady without binding. Attach the finder scope and align it with the main tube during daylight by centering a distant object in the main eyepiece and then adjusting the finder’s screws until the same object sits in its crosshairs.

Shopping for one? See our guide: Gskyer Az Astronomical Refractor Telescope (2026): Pros, Cons & Verdict.

Set the tripod on firm, level ground. Wobbly legs will blur every view, and a telescope this light is easy to knock out of position.

Choose the Right Eyepiece and Magnification

Most 70mm refractors include a low-power eyepiece for wide views and a higher-power one for detail. Low magnification gives a brighter, wider field, which suits star fields and large deep-sky objects. Higher magnification shows finer lunar and planetary detail but dims the image and magnifies any shake.

A useful rule: keep magnification modest with a 70mm aperture. The telescope gathers limited light, so pushing power too far produces dim, soft images. Check the eyepiece focal lengths printed on each barrel and use the formula magnification = telescope focal length ÷ eyepiece focal length to estimate what you’re getting.

Find and Observe Your First Targets

Start with the Moon

The Moon is the easiest first target. Its brightness lets you focus quickly, and its terminator, the line between light and shadow, reveals craters and mountain ranges in sharp relief. Observe during the crescent and quarter phases, when shadows make the surface most dramatic.

Move to Planets and Bright Stars

Jupiter appears as a small disk with two faint cloud bands, and its four Galilean moons are visible as tiny points of light that shift position from night to night. Saturn’s rings can appear as a faint oval at higher magnification on steady nights. Open star clusters such as the Pleiades look best at low power, where many stars fill the field together.

Observing Tips for Clearer Views

  1. Let the telescope cool outdoors for 20 to 30 minutes before observing, so the tube air settles and images sharpen.
  2. Observe from a dark site when possible, and let your eyes adapt for about 15 minutes.
  3. Focus slowly, approaching from both sides of best focus to find the sharpest point.
  4. Use a red-light flashlight to read star charts without ruining your dark adaptation.
  5. Check the weather and seeing conditions. Steady air matters more than clear sky when you push magnification.

Common Mistakes to Avoid

  • Using the highest-power eyepiece first, which produces dim, shaky images.
  • Skipping the finder alignment and then struggling to locate targets in the dark.
  • Pointing the telescope at the Sun without a proper solar filter, which can cause permanent eye damage.
  • Expecting faint galaxies or nebulae to look like long-exposure photographs. Most appear as soft gray smudges.
  • Forgetting to adjust the focuser after changing eyepieces, which makes sharp images seem impossible.
  • A red-light headlamp keeps your night vision intact while you read charts and adjust knobs. View on Amazon
  • A planisphere or star chart app helps you identify constellations and plan targets for the night. View on Amazon
  • A small table or sturdy observing stool lets you observe comfortably at the eyepiece for longer sessions. View on Amazon

FAQ

Can a gskyer 70mm refractor show planets?

Yes. It shows Jupiter’s cloud bands and its four largest moons, plus Saturn’s rings as a small oval on steady nights. Venus shows its phases, and Mars appears small and reddish, mostly during close oppositions.

Do I need a solar filter for this telescope?

Yes, if you ever plan to view the Sun. Use a proper full-aperture solar filter fitted to the front of the telescope. Never use eyepiece-mounted filters or improvised dark glass.

What should I observe first as a beginner?

Begin with the Moon at low to moderate power, then move to Jupiter and bright star clusters. These targets build your focusing skills and give rewarding views on most clear nights.

Conclusion

With careful assembly, sensible eyepiece choices and a few observing habits, a gskyer 70mm astronomical refractor telescope delivers satisfying views of the Moon, planets and bright star clusters. Start simple, build your skills night by night, and let the sky reveal more as your technique improves.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Claire Whitaker
Claire Whitaker

Claire Whitaker writes reviews and buying guides for Astronomy Site.