We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Zhumell ED 2x Barlow Lens: What It Does and How to Use It

Learn what the Zhumell ED 2x Barlow lens does, how it doubles your telescope's magnification, and how to use it for sharper planetary and lunar views.

Updated November 2026

The zhumell ed 2x barlow lens doubles the magnification of any eyepiece you place in it, so a 10mm eyepiece behaves like a 5mm. You get more detail on the Moon, planets and double stars without buying new eyepieces. This guide explains what the lens does, how to attach it, and where it helps most.

What the ED 2x Barlow Does to Your View

A Barlow is a negative lens that sits between the telescope and the eyepiece. It extends the focal path, so the eyepiece magnifies a larger image. A 2x Barlow doubles the effective focal length of your eyepiece. The “ED” designation refers to extra-low dispersion glass, which manufacturers say reduces color fringing on bright targets compared with standard Barlow designs.

Shopping for one? See our guide: 6 Best Gso 2 2x Ed Barlow Lens Compared for Planetary and Deep-Sky Viewing.

Higher magnification is not always brighter. Doubling power spreads the same light over a larger image, so the view gets dimmer. Deep-sky objects such as faint nebulae often look worse at high power, while bright planets and the Moon usually hold up well.

Setting Up the Barlow Correctly

Proper setup matters more than the lens itself. Follow these steps:

  1. Confirm your eyepiece barrel fits the Barlow’s threads or adapter. Most 1.25-inch Barlows accept 1.25-inch eyepieces; check the manufacturer’s listing for barrel size.
  2. Insert the Barlow into the diagonal or focuser drawtube, then tighten the thumbscrew gently.
  3. Slide the eyepiece into the Barlow and lock it at a comfortable height.
  4. Start with a low-power eyepiece, center a bright target, and rack the focus slowly.
  5. Check that the eyepiece is fully seated. A loose connection causes shifting and a blurry view.

Where to Place It in the Light Path

Most observers put the Barlow between the diagonal and the eyepiece, which keeps the focuser free for other accessories. Placing it before the diagonal is also possible, but it can require more inward focuser travel and sometimes a different balance on the tube. Your telescope’s manual will describe its focus range. Comparing the two placements on a bright planet will show you which one gives sharper focus with your setup.

When the ED 2x Barlow Helps Most

Use the Barlow when the target has fine detail that benefits from extra power and enough steady air to support it:

  • The Moon: Crater rims and rilles show more contrast at higher power.
  • Planets: Jupiter’s cloud bands and Saturn’s rings are often easier to pick out.
  • Double stars: Tighter pairs separate more cleanly.

If you are unsure whether to add a Barlow or buy a shorter eyepiece, our article Difference Between 2x and 3x Barlow Lens: Which Should You Choose? compares the two approaches. For a general overview of how these lenses work, see What Is a 2x Barlow Lens? How It Works and What It Does.

Common Mistakes

  • Expecting a Barlow to fix poor seeing. Turbulent air blurs detail at any power.
  • Using high magnification on faint deep-sky targets, which makes them harder to see.
  • Forgetting that the Barlow changes focus point, so you may need to rack the focuser further in or out.
  • Stacking several accessories that add travel and push the eyepiece out of focus range.
  • Overtightening the thumbscrew, which can scratch the barrel.

A few accessories pair well with a 2x Barlow:

  • A 1.25-inch eyepiece in the 10mm to 15mm range, which gives a useful starting magnification when doubled. View on Amazon
  • A moon filter to reduce glare when observing the Moon at higher power. View on Amazon
  • A collimation tool, since sharp focus at high power depends on well-aligned optics. View on Amazon

FAQ

Does a 2x Barlow double the magnification of every eyepiece?

Yes, it roughly doubles the magnification of whatever eyepiece you insert into it. A 20mm eyepiece becomes the equivalent of a 10mm.

Will the Barlow make my view too dark?

Higher magnification spreads light over a larger image, so the view appears dimmer. The effect is most noticeable on faint objects and less so on bright planets and the Moon.

Do I need a special focuser for the Barlow?

Not usually. Most telescopes with a standard 1.25-inch focuser can accept it, but check your focuser’s inward travel if you plan to place the Barlow ahead of the diagonal.

Conclusion

The zhumell ed 2x barlow lens is a simple way to double the power of eyepieces you already own. It works best on the Moon, planets and tight double stars when your skies are steady. Set it up carefully, start at low power, and judge the result by how sharp the view looks rather than how high the number gets.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Astronomy Site.