Celestron Explorascope 22100 60az Refractor Telescope: A Practical Guide (2026)
The Celestron Explorascope 22100 60AZ refractor telescope is a simple, beginner-friendly scope. Learn what it shows, how to set it up, and what to expect.
Updated November 2026
The Celestron Explorascope 22100 60AZ refractor telescope is a small, simple scope built for first-time observers. With it, you can find and view the Moon’s craters, the four largest moons of Jupiter, the rings of Saturn, and a handful of bright deep-sky objects. This guide covers what the instrument realistically shows, how to set it up in one evening, and how to get the most from its limited aperture.
What the 60mm Refractor Can and Cannot Show
The 22100 uses a 60mm objective lens with a focal length of about 700mm, which puts it in the category of short, low-power beginner refractors. Expect bright, high-contrast views of objects that are large or luminous. The Moon is the standout target: its terminator, the line between light and shadow, reveals craters and mountain ranges with real detail at moderate magnification. Jupiter appears as a small disk with its moons visible as tiny points in a line, and Saturn’s rings are discernible as a slight oval, though you will not see the Cassini Division.
Shopping for one? See our guide: Celestron Omni XLT 102mm AZ Refractor Telescope: 3 Best Picks Compared (2026).
Deep-sky targets are more limited. The Orion Nebula, the Pleiades, and some of the brighter open clusters are worth seeking out. Galaxies and faint nebulae will look like faint smudges at best. Set your expectations accordingly, and you will be pleased with what you see.
Setting Up the Telescope Step by Step
The included altazimuth mount moves up-down and left-right, which makes it easy to track objects by hand. Assembly takes a few minutes and requires no tools beyond what is typically supplied.
- Place the tripod on level ground and spread the legs to a comfortable working height.
- Attach the mount head to the tripod and tighten the center knob firmly.
- Mount the optical tube on the altazimuth bracket and secure the clamps.
- Insert the eyepiece into the diagonal or focuser, starting with the lowest-power eyepiece.
- Point the scope at a distant daytime object, such as a rooftop, and focus until it is sharp.
- Aim the finderscope at a bright target and center it in the main tube’s view.
Finding Targets and Getting Sharp Views
Start with the Moon, which is bright, easy to locate, and forgiving of imperfect focus. Use your finderscope to center it, then rack the focuser slowly until the terminator is crisp. For planets, switch to a moderate eyepiece and use the altazimuth controls to track slowly across the sky, since the Earth’s rotation will move objects out of view within a few minutes.
Good views depend heavily on conditions. Look away from streetlights, allow your eyes around 20 minutes to adapt to the dark, and wait for the scope to reach outdoor temperature before judging detail. A steady, cool evening with low humidity gives far sharper images than a warm, hazy one.
Recommended gear
A few inexpensive accessories will make the most of this telescope.
- A planisphere or star chart app: helps you identify constellations and target locations before you start, saving time at the eyepiece. View on Amazon
- A red-light headlamp: preserves your night vision while you adjust settings and read charts. View on Amazon
- A moon filter: cuts glare when observing the bright Moon, improving contrast on surface detail. View on Amazon
Common Mistakes
- Starting with high magnification. Begin with the lowest-power eyepiece, since more power on a small aperture only makes images dimmer and blurrier.
- Expecting nebulae to look like photographs. Most deep-sky objects appear gray and faint through a 60mm scope.
- Forgetting that the sky rotates. Objects drift out of the field of view quickly, so nudge the mount regularly.
- Observing too soon after moving the telescope outdoors. Allow time for thermal equilibrium before focusing finely.
- Ignoring dark-adaptation. Give your eyes about 20 minutes away from white light before judging faint objects.
FAQ
Can the Celestron Explorascope 22100 show planetary rings?
Saturn’s rings are visible as a slight oval shape, and you can see the planet’s disk separate from them. Fine divisions in the rings are generally beyond this instrument’s resolving power.
Is this telescope suitable for astrophotography?
It is primarily a visual instrument. Basic smartphone photos of the Moon through the eyepiece are possible, but dedicated astrophotography generally requires a mount and camera designed for it.
What is the best first target for a beginner?
The Moon is the most rewarding starting point because it is bright, easy to find, and shows surface detail clearly even at low power.
Conclusion
The Celestron Explorascope 22100 60AZ refractor telescope rewards patient observers with clear views of the Moon, the brighter planets, and a few bright deep-sky objects. Set realistic expectations, start with low power, and choose dark, steady nights. With those habits, it makes an accessible first step into observational astronomy.
Related reading
- Celestron Starsense Explorer Lt 70az Refractor Telescope: A Practical Guide (2026)
- Celestron StarSense Explorer 102mm Refractor Telescope: Setup and What It Shows
- Celestron PowerSeeker 50 Refractor Telescope: 6 Best Picks Compared (2026)
- Celestron Omni XLT 120mm Refractor Telescope: What It Shows and How to Use It
Ready to choose one?
