Orion Observer Ii 70mm Equatorial Refractor Telescope Kit: A Practical Guide (2026)
Learn how to set up the orion observer ii 70mm equatorial refractor telescope kit, align its equatorial mount, and know what it can realistically show you.
Updated November 2026
The orion observer ii 70mm equatorial refractor telescope kit is a small, portable refractor on an equatorial mount, built for people who want to find the Moon, bright planets and the brightest deep-sky objects without a lot of fuss. This guide walks through assembly, polar alignment, first observing and realistic expectations, so you know what the scope will and won’t show you before your first clear night.
What the Kit Includes and How to Assemble It
Most kits in this class ship with the optical tube, an equatorial mount with tripod, a finder scope, and one or two eyepieces. Manufacturers typically specify a 70mm objective and a focal length around 700mm, which works out to a focal ratio near f/10. That long, narrow beam suits planets and the Moon well.
Shopping for one? See our guide: Orion Observer II 70mm Altazimuth Refractor Telescope: 3 Best Picks Compared.
- Spread the tripod legs fully and tighten the leg locks so the head sits level.
- Attach the mount head to the tripod, then thread the center accessory bolt firmly.
- Mount the optical tube to the declination saddle and tighten the clamp, but keep the tube balanced in both directions.
- Install the finder scope bracket and align the finder with a distant daytime object before dark.
- Insert the lowest-power eyepiece into the diagonal or focuser and lock it in place.
Polar Alignment on an Equatorial Mount
The equatorial mount is the reason this kit is useful for tracking objects across the sky. To use it properly, the right ascension axis must point at the celestial pole. In the Northern Hemisphere, that means Polaris, and you adjust the latitude scale to match your observing latitude, then use the azimuth knobs to point the polar axis at Polaris through the polar scope or a rough sighting along the tube.
Rough alignment is usually good enough for visual observing at this focal length. Once aligned, you only need to move the right ascension slow-motion control to follow an object. If you want tighter tracking for longer sessions, that is the point where you would consider a tracking upgrade rather than changing the basic setup.
What You Will Actually See
At 70mm aperture, expect the Moon to look sharp and detailed, with craters and maria clearly visible at moderate magnification. Jupiter will show its cloud bands and most of its four large moons as small points of light, and Saturn’s rings should appear as a distinct oval. Bright deep-sky targets such as the Orion Nebula and the Pleiades will look like faint but recognizable patches rather than the colorful images in photographs.
Galaxies and faint nebulae are harder. Owners often report that these need dark skies, patience and a lower-power eyepiece to show any structure at all. Setting realistic expectations early keeps the hobby enjoyable.
Common Mistakes to Avoid
- Starting with the highest-power eyepiece. Begin with the lowest power so the target is easy to find and frame.
- Skipping daytime finder alignment. A finder that is off by a degree will send you searching for a long time.
- Letting the tube drift out of balance. Loosen the clamp and re-balance when you add or remove accessories.
- Observing too soon after setting up outdoors. Let the optics reach air temperature for better image steadiness.
- Expecting photo-like color and detail. Visual observing shows more modest views than long-exposure images.
Recommended Gear
- A red-light flashlight keeps your night vision intact while you read star charts and adjust the mount. View on Amazon
- A planisphere or star chart app helps you identify targets and plan which objects are up for the evening. View on Amazon
- A dew shield helps keep the front lens from fogging on humid nights. View on Amazon
FAQ
Is this kit good for a complete beginner?
Yes, it is a practical starting point because the setup is straightforward and the Moon and planets respond well to its focal length. Expect to spend some time learning the mount before the views feel natural.
Do I need to polar align every time?
You should align the mount each time you set it up in a new spot, since moving the tripod changes the pointing. Once aligned, you can keep observing without repeating the full process for that session.
Can it photograph the night sky?
It can be used with a smartphone adapter for the Moon and bright planets, but long-exposure deep-sky astrophotography needs a more stable mount and camera. Check with the manufacturer for supported accessories and current guidance.
Conclusion
The orion observer ii 70mm equatorial refractor telescope kit rewards a little setup time with clear views of the Moon, planets and bright star clusters. Start with rough polar alignment, use low power, and set your expectations for visual detail rather than photographs. With those habits, the scope becomes a dependable tool for learning the sky.
Related reading
- 4 Best Orion Observer 90mm Equatorial Refractor Telescope Picks for 2026
- 3 Best Orion Observer Equatorial Refractor Telescope Picks for 2026
- Orion AstroView 90mm Equatorial Refractor Telescope: A Setup and Viewing Guide
Ready to choose one?
