Gso 2 2x Ed Barlow Lens Gs22b: What It Does and How to Use It
Learn what the GSO 2 2x ED Barlow Lens GS22B does, how it doubles your eyepiece magnification, and how to use it for sharper planetary and deep-sky views.
Updated November 2026
The gso 2 2x ed barlow lens gs22b is a 2x Barlow lens with extra-low dispersion (ED) glass, designed to double the magnification of any eyepiece you place in it. This guide explains what it does to your view, how to set it up in your telescope’s focuser, and where it works best. By the end, you will know whether it fits your observing and how to get clean, sharp results from it.
What the GSO 2x ED Barlow Lens Does
A Barlow lens sits between the telescope and the eyepiece and extends the effective focal length of the optical system. Because the GS22B is a 2x model, a 10 mm eyepiece behaves like a 5 mm eyepiece, and a 25 mm eyepiece behaves like a 12.5 mm one. The useful result is more magnification from eyepieces you already own, without buying new ones.
Shopping for one? See our guide: 6 Best Gso 2 2x Ed Barlow Lens Compared for Planetary and Deep-Sky Viewing.
The “ED” designation refers to extra-low dispersion glass, which manufacturers specify to reduce chromatic aberration, the faint color fringing around bright objects. That matters most on bright targets such as the Moon, Jupiter and Venus, where color fringing is most visible at higher powers.
How to Set It Up Step by Step
- Insert the eyepiece you plan to use into the Barlow lens, making sure the eyepiece barrel is fully seated and the lens is locked.
- Loosen the focuser thumbscrew on your telescope and slide the Barlow, with eyepiece attached, into the focuser drawtube.
- Tighten the focuser lock lightly so the assembly stays put without flexing.
- Point the telescope at a bright, stable target such as the Moon, and rack the focuser slowly until the image snaps into focus.
- Fine-tune focus with small movements, then check for vignetting or dark edges that could mean the assembly is too far in or out.
Choosing the Right Eyepiece Pairing
Magnification is simply the telescope’s focal length divided by the effective eyepiece focal length. Doubling the power is useful only if the telescope’s aperture and the sky conditions can support it. A common rule of thumb is to keep magnification at or below about 50x per inch of aperture, though steady seeing often limits you well before that.
| Eyepiece focal length | Effective focal length with 2x Barlow | Typical use |
|---|---|---|
| 25 mm | 12.5 mm | Wide-field and general viewing |
| 10 mm | 5 mm | Planetary detail on steady nights |
| 6 mm | 3 mm | High power, only on very steady air |
Where the Barlow Works Best
The GS22B shines on planets and the Moon, where extra magnification reveals surface detail such as Jupiter’s cloud bands or lunar crater rims. It is less useful for large deep-sky objects like the Orion Nebula or the Andromeda Galaxy, which look better at lower power with a wider field. Atmospheric steadiness, called seeing, decides how much magnification is usable on any given night, so the Barlow often adds more blur than detail when the air is turbulent.
Checking Your Telescope’s Compatibility
Confirm that your focuser accepts a 1.25-inch or 2-inch barrel, depending on which size the lens is built for, and that your eyepieces fit the Barlow’s barrel. Make sure your eyepiece’s eye relief remains comfortable when the Barlow lengthens the optical path.
Common Mistakes
- Pushing magnification past what your aperture and the night’s seeing can support, which makes images look soft and washed out.
- Leaving the eyepiece loose in the Barlow, which can shift focus during observing.
- Placing the Barlow too far into the focuser, causing vignetting or a dark ring at the edges.
- Judging the Barlow on a poor night; test it on a steady target before deciding it does not work for you.
- Forgetting that doubling magnification halves the field of view, so finding objects takes more care.
Recommended Gear
- Planetary-grade eyepieces pair well with a 2x Barlow because they give sharp images at the shorter effective focal lengths the Barlow produces. View on Amazon
- A collimation tool helps keep your optics aligned, which matters more once you add magnification. View on Amazon
Related Reading
For a broader look at the Barlow, see 2x Barlow Lens Telescope: What It Does and When to Use One and How to Use a 2x Barlow Lens: A Step-by-Step Guide for Beginners. If you are weighing magnification options, Difference Between 2x and 3x Barlow Lens: Which Should You Choose? compares the two strengths side by side.
FAQ
Does the GSO 2x ED Barlow lens work with any telescope?
It works with most telescopes that have a standard focuser accepting the Barlow’s barrel size. Check your focuser diameter and confirm your eyepieces fit the Barlow before buying.
Will the Barlow make my images brighter?
No. Magnification spreads the same light over a larger image, so the view appears dimmer, not brighter. Higher power trades brightness for detail.
Should I use the Barlow for deep-sky objects?
Usually not. Deep-sky objects look better at lower power with a wider field, while the Barlow suits planets and the Moon.
Conclusion
The gso 2 2x ed barlow lens gs22b doubles the magnification of your existing eyepieces and can sharpen planetary views when your aperture and the night’s seeing allow it. Set it up carefully, pair it with appropriate eyepieces, and test it on steady targets. Used this way, it adds useful detail without buying new glass.
Ready to choose one?
