We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Atik Infinity Astrophotography Camera: What It Does and How to Use It

Learn what the atik Infinity astrophotography camera does, how it fits a telescope setup, and the key steps to capture your first deep-sky images.

Updated November 2026

The atik Infinity astrophotography camera is a cooled monochrome CCD camera designed to attach to a telescope and record faint deep-sky objects as long exposures stacked into a single image. This guide explains what the camera is good at, what else you need to run it, and the basic steps to get from a first test frame to a usable picture of a nebula or galaxy.

What the atik Infinity Does

The Infinity is a planetary and deep-sky imaging camera built around a cooled sensor. Cooling reduces thermal noise, which matters when you expose for many seconds or minutes to capture dim light. Manufacturers describe the Infinity as a camera you mount at the eyepiece position or on a focuser adapter, replacing the eyepiece entirely. Because it records images rather than showing them to your eye, it can reveal structure that stays invisible at the eyepiece, especially in nebulae and faint galaxies.

Shopping for one? See our guide: Top 7 Deep Sky Astrophotography Cameras for Serious Imaging in 2026.

Set Up the Telescope and Mount First

Good images depend more on tracking than on the camera. Before you touch the camera software, confirm the following:

  1. Polar align the mount. Most owners use a polar alignment routine built into their mount software to get within a few arcminutes of the celestial pole.
  2. Balance the telescope on both axes. An unbalanced load strains the motors and causes uneven tracking.
  3. Choose a target high in the sky, away from the horizon, where seeing and atmospheric extinction are better.
  4. Attach the camera and focus. Use a bright star and a Bahtinov mask or the software’s focus assist to get the sharpest focus.

Capture and Stack Your Frames

Deep-sky imaging works by collecting many short or medium exposures and combining them. Start with a test sequence to find a sensible exposure length. Too short and the faint detail sits buried in noise; too long and bright stars saturate or the mount drifts. Many imagers begin with exposures in the range of one to several minutes, adjusting based on the target and sky conditions.

Capture dark frames, flat frames and bias frames as calibration. Darks match the sensor temperature and exposure length of your light frames. Flats correct dust shadows and vignetting. Stack all frames in dedicated stacking software, then stretch the result to reveal faint structure.

Use a Consistent Sensor Temperature

Set the cooling target and let the sensor stabilize before you start. Shooting darks at a different temperature from your lights leaves residual noise that stacking cannot remove.

  • A stable, well-tracking mount keeps stars round over long exposures, which matters more than any camera upgrade. View on Amazon
  • A filter wheel with narrowband filters helps isolate emission nebulae and reduces light pollution in suburban skies. View on Amazon
  • A guide camera and guide scope let the mount correct small tracking errors during long sessions. View on Amazon

Common mistakes

  • Skipping polar alignment and blaming the camera for elongated stars.
  • Using a single long exposure instead of many stacked frames.
  • Forgetting calibration frames, which leaves dust rings and uneven backgrounds.
  • Focusing at the wrong temperature. Refocus after large temperature changes during the night.
  • Stretching the image too hard, which amplifies noise and banding.

For background on how camera choice compares with other imaging approaches, see Telescope vs Camera Lens for Astrophotography: A Practical Guide (2026). If you are weighing cooled astronomy cameras more broadly, Top 3 CCD Cameras for Astrophotography Compared for Deep-Sky Imaging (2026) covers how dedicated CCD models differ in use. Beginners on a tighter setup may also find Setting Up Camera for Astrophotography: A Step-by-Step Guide for Beginners useful for the basic workflow.

FAQ

Do I need a telescope to use the atik Infinity?

Yes, for deep-sky work the camera is designed to be used with a telescope and a tracking mount. Used on a camera lens alone, it will not capture the same faint detail.

How long should my exposures be?

It depends on the target, your sky, and your mount’s tracking. Test a few exposure lengths on your object and choose the longest one where stars stay round and the sky background is not saturated.

Are calibration frames really necessary?

They are not strictly required, but skipping them usually leaves visible dust spots, vignetting and background noise that stacking alone cannot remove.

Conclusion

The atik Infinity turns a telescope into a deep-sky imaging system when paired with solid tracking and careful calibration. Start with good polar alignment, capture many stacked frames with matching darks and flats, and keep the sensor temperature steady. Once that workflow is reliable, the camera’s sensitivity will show you far more than the eyepiece can.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Astronomy Site.