Celestron PowerSeeker 60AZ Barlow Lens: How to Use It for Sharper Views
Learn how a Celestron PowerSeeker 60AZ Barlow lens doubles your eyepiece power, what it shows you on planets and the Moon, and how to set it up correctly.
Updated November 2026
A Barlow lens for the Celestron PowerSeeker 60AZ doubles or triples the magnification of each eyepiece you already own. Used correctly, it lets you split the Moon’s craters, see more detail on Jupiter’s cloud bands, and spot Saturn’s rings more clearly without buying new eyepieces. This guide covers what the lens does, how to insert it, and how to avoid the mistakes that make views look worse.
What a Barlow Lens Does on a 60mm Refractor
A Barlow is a negative lens that sits between the diagonal and the eyepiece. It lengthens the effective focal length of the optical system, so the image is magnified more. A 2x Barlow turns a 10mm eyepiece into the equivalent of a 5mm, and a 25mm eyepiece into a 12.5mm. The PowerSeeker 60AZ has a short focal length of roughly 700mm, so its low-power eyepieces already show a wide field. Adding a Barlow lets you reach higher magnification when the atmosphere is steady enough to support it.
Shopping for one? See our guide: Celestron Omni 2X Barlow Lens Review: Is It Worth It?.
Keep expectations realistic. A 60mm objective gathers limited light and resolves limited detail, so magnification past about 120x to 140x mostly makes the image dimmer and softer. Planets and the Moon benefit most from a Barlow. Faint deep-sky objects usually look better at lower power.
Step-by-Step: Setting Up the Barlow
- Start with a low-power eyepiece, such as the one supplied with the telescope, and center a bright target like the Moon.
- Loosen the diagonal’s thumbscrew and remove the eyepiece.
- Thread the Barlow into the diagonal’s barrel. Most Barlows use a standard 1.25-inch nosepiece, so confirm the threads match before tightening by hand.
- Insert your eyepiece into the Barlow’s threaded end and tighten gently.
- Refocus slowly. Magnified views come to focus at a different point, so expect to rack the focuser a bit further.
- Check the view. If the image looks soft, let the air settle for a minute and try again.
Choosing the Right Eyepiece Pairing
Your eyepiece’s focal length determines the final power. Use this quick reference for a 700mm telescope:
| Eyepiece | With 2x Barlow | Best Use |
|---|---|---|
| 25mm | 12.5mm (about 56x) | Wide views of the Moon and star clusters |
| 10mm | 5mm (about 140x) | Lunar craters and Jupiter’s bands |
| 6mm | 3mm (about 233x) | Rarely useful; usually too dim |
For planetary work, the 10mm pairing is the most practical starting point. If you are still learning the setup, the broader guide to Celestron Barlow Lens How to Use: Steps for Sharper Views shows the same steps for other Celestron models.
Getting Sharper Views
Image quality depends on conditions as much as gear. Wait until the telescope has cooled to outside temperature, which often takes 20 to 30 minutes after moving it outdoors. Avoid observing over rooftops or pavement, where heat shimmer degrades the image. A steady night will show more detail with a Barlow than a turbulent one. For a broader look at how this lens fits into a magnification plan, see When to Use a Barlow Lens: Get More Power Without Losing Sharpness.
Common Mistakes
- Pushing magnification too high. If the image gets dim and blurry, step back to a lower power.
- Forgetting to refocus after inserting the Barlow.
- Tightening the threads too hard, which can strain the diagonal.
- Judging conditions at the start of the night. Seeing often improves after the telescope has acclimated.
- Trying to use a Barlow on faint nebulae, where lower power gives brighter, more pleasing views.
Recommended gear
- A Celestron-compatible 1.25-inch Barlow lens: a standard threaded Barlow matches the PowerSeeker’s diagonal and keeps the setup simple. View on Amazon
- A pair of 1.25-inch eyepieces in the 10mm to 25mm range: these give you a practical range of powers when paired with the Barlow. View on Amazon
FAQ
Does a Barlow lens work with the PowerSeeker 60AZ?
Yes. As long as the Barlow uses a 1.25-inch barrel, it fits the standard diagonal and eyepiece system on the 60AZ.
What power does a 2x Barlow give?
It doubles the magnification of whatever eyepiece you use. A 10mm eyepiece with a 2x Barlow performs like a 5mm, roughly 140x on this telescope.
Why does the image look worse with the Barlow?
Usually the magnification is too high for the conditions or the telescope has not cooled. Try a lower-power pairing and wait for steadier air.
Conclusion
A Barlow lens is one of the simplest ways to get more out of a PowerSeeker 60AZ. Pair it with a moderate eyepiece, focus carefully, and save high power for steady nights and bright planets. Start with the 10mm combination, and you will see clearer detail on the Moon and Jupiter.
Related reading
- Celestron PowerSeeker 127EQ Barlow Lens: How to Use One for Sharper Views
- How to Use 3x Barlow Lens Celestron: Step-by-Step for Sharper Views
- Celestron X3 Barlow Lens: What It Does and How to Use It (2026)
Ready to choose one?
