We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Where Do You Place a Barlow Lens: Step-by-Step Guide (2026)

Where do you place a Barlow lens in your telescope? Learn the correct spot in the light path, how to test it, and the mistakes that blur planetary views.

Updated November 2026

A Barlow lens goes in the light path between the telescope’s focuser and your eyepiece, as close to the focuser as practical. Placing it there lets the Barlow multiply the focal length before the image reaches your eye, which raises magnification without changing the eyepiece you already own. This guide explains where to put it, how to confirm the position is right, and what to avoid.

Understand the Light Path First

Light enters the telescope, comes to focus at the focuser, and then passes into the eyepiece. A Barlow lens is a negative lens, so it must sit ahead of the eyepiece to stretch the focal point outward and enlarge the image. If you place it after the eyepiece, it does nothing useful for magnification. The general rule is simple: the Barlow goes between the focuser and the eyepiece, not anywhere else in the system.

Shopping for one? See our guide: 5 Best Barlow Lens for Telescope Picks Compared (2026).

Where Exactly to Put It

For most setups, the Barlow sits directly in the focuser drawtube, with the eyepiece then inserted into the Barlow’s barrel. Position matters because the magnification factor depends on how far the Barlow sits from the focal plane. Placing it deeper in the focuser (closer to the focal plane) generally gives the rated magnification. Pulling it farther out reduces the effect and may require refocusing.

Standard Setup (Barlow Before the Eyepiece)

  1. Remove the eyepiece from the focuser.
  2. Insert the Barlow barrel into the focuser, with the lens end pointing toward the telescope’s light path.
  3. Slide the eyepiece into the Barlow’s receiving end and tighten its clamp.
  4. Rack the focuser inward or outward until the image is sharp.

Use the Barlow Before a Diagonal (If You Have One)

If you use a diagonal mirror, the standard order is focuser, then Barlow, then diagonal, then eyepiece is sometimes recommended, but the diagonal-first order is also common. Read the notes in Barlow Lens Before or After Diagonal: Where to Place It (2026) for the reasoning behind each option. Either way, the Barlow stays on the focuser side of the eyepiece.

Check the Placement and Focus

After installing the Barlow, the image will almost always need refocusing because the focal point has moved. Start with a bright, stable target such as the Moon or a bright planet. Rack slowly through focus and watch for the point where fine detail snaps into view. If you cannot reach focus at all, the Barlow is probably too far out in the drawtube or the focuser is fully racked in; try seating the Barlow deeper or using a longer eyepiece.

Use the Barlow’s rated magnification as a guide, not an exact promise. The true magnification changes with the eyepiece’s focal length and the Barlow’s spacing, so it is worth confirming your setup on a known target. For a general overview of the function, see How Does a Barlow Lens Work? Magnification, Focus and Tips.

  • Celestron X2 Barlow Lens is a commonly used 2x option that many beginners pair with standard eyepieces for planetary work. View on Amazon
  • Orion 3x Barlow Lens offers a stronger multiplication for users who want to push magnification on the Moon and planets. View on Amazon

Common Mistakes

  • Placing the Barlow after the eyepiece, which removes most of its effect.
  • Forgetting to refocus after installing the Barlow, then assuming it is not working.
  • Pushing the Barlow too far out of the focuser, which lowers the real magnification.
  • Using too much magnification on a small telescope, where the image gets dim and soft.
  • Loosening the eyepiece clamp so the eyepiece slides and shifts focus during viewing.

FAQ

Does it matter whether the Barlow goes before or after a diagonal?

It can change the magnification slightly and affect focus travel. Both placements are widely used, so test whichever gives you sharp focus with your eyepieces.

Why can’t I focus after adding a Barlow?

The Barlow moves the focal point, so the focuser may need to be racked farther in or out. If focus is still out of reach, try seating the Barlow deeper or using a longer focal-length eyepiece.

Can I use a Barlow with any telescope?

Most Barlows work with standard telescope focusers, but barrel size must match your focuser (commonly 1.25 inch or 2 inch). Check the fit before buying. Consult a telescope retailer or the manufacturer’s documentation if you are unsure.

Conclusion

Place a Barlow lens between the focuser and the eyepiece, seated as deep in the drawtube as practical. Refocus after each change, and confirm the magnification on a bright target. Once the position is right, the Barlow becomes a simple way to extend your eyepiece collection.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our telescopes & stargazing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Astronomy Site.